Real Cape Town projects, the floors, the areas and what went into them.

Water-damaged laminate lifted and replaced with warm-grey LVT over a self-levelled screed.

One warm oak floor run through the open-plan living, kitchen, bedroom and bathroom over a self-levelled base.

Lifted old carpet and brought the original timber floor beneath back to life with a full sand and seal.

Premium Oggie engineered oak with bespoke brass trims in a light-filled coastal home.

Sanded and re-sealed an Oggie engineered floor with WOCA Master Invisible 2K for a natural raw-oak finish.

Multi-floor commercial fit-out for Growthpoint, LVT through the WCs and kitchenettes over self-levelled screeds.

New pine floors sanded, stained a warm Oregon tone and sealed with polyurethane across a room and attic.

Old bitumen sealed, a feather-finish screed laid and the client’s vinyl tiles installed in an attic conversion.

An existing engineered wood floor sanded back and re-sealed to a fresh, even finish.

Old laminate lifted and existing tiles ground and slurried over, then Allegro X LVT laid through the living areas.

A Vaporstop epoxy moisture barrier and TAL self-levelling screed under Floorworx vinyl tiles in a packing facility.

An engineered-oak staircase, warm vinyl through the main rooms and loft carpet tiles over a sealed, levelled base.

A staircase clad in Aspen Project vinyl in Swedish Oak, finished with bronze stair nosing and angle trims.

PUR-coated commercial vinyl and warm Como LVT over a full moisture-barrier and self-levelling system.

Warm Aspen SPC in Italian Oak floated straight over a cold epoxy floor, with 90 mm skirting.